Heavy Duty Suction Mount

The Quad Lock Heavy Duty Suction Mount offers the ultimate secure and versatile phone mounting solution for your car. Featuring a large base and lever-actuated suction, it provides a strong hold that can be easily repositioned without losing grip. With a dual pivot arm and two points of adjustment, you can find the perfect angle for your phone on your vehicle’s windscreen. The industrial-strength suction ensures a secure fit, while the mount’s design makes installation simple and hassle-free.
Tutorials
FAQ
Whats Included?
- 1 x Quad Lock 360™ Suction Base
- 1 x Quad Lock 360™ Dual Pivot Arm Medium
- 1 x Quad Lock 360™ Top Cap (if no additional Head selected)
Can I modify the Heavy Duty Suction Mount?
Yes, you can modify the Heavy Duty Suction Mount. Since it's part of our 360 range, all components are interchangeable with other 360 parts, allowing you to customise it to suit your needs. You can even build and personalise your setup using our 360 Kit Builder tool, available on our website here.
What activities / applications are NOT recommended for the Heavy Duty Suction Mount??
It is not recommended for use on motorcycles, scooters, ATVs, or other high frequency engine vibration applications.
How does the Heavy Duty Suction Mount compare to the CAR-5 in larger 4x4 applications where the windscreen is further away from the driver?
As it's built/configured with a Dual Pivot (Medium) Arm and can have heads such as a Weatherproof Wireless Charging attached, the mount is approx. 7 cm (2 ¾ in.) closer to the driver.
Are replacement / spare parts available for the Heavy Duty Suction Mount?
There are some parts that we have replacements for that are part of the mount, these include:
- The 360 Top Cap
- Dual pivot balls from the dual pivot arm
There are no plans to make spare parts available for the Suction Base. In case of damage, the whole Suction Base is to be replaced, as it is the Base part/component of a complete mount.
Can I add a Wireless Charging Head to the Heavy Duty Suction Mount?
Yes, you can add a Wireless Charging Head or a MAG head to the Heavy Duty Suction Mount. During checkout, you’ll have the option to choose one of these heads or stick with the default 360 Top Cap. These charging heads are also sold separately, so you can purchase one anytime if you decide to upgrade later.
Does the Suction Base fit inside our Dash Pad?
No, the base is wider than the base of the Windscreen/Dash Mount and will not fit inside the Dash Pad.
How much weight will the Heavy Duty Suction Mount hold?
The Heavy Duty Suction Mount is capable of supporting loads of up to 1.2kg through typical use cases.
Can the Heavy Duty Suction Mount be used in planes or helicopters? Are there any required certifications?
Yes, the Heavy Duty Suction Mount can be used in aviation applications, up to an altitude of 10,000 feet. Certifications are not required as the Heavy Duty Suction Mount is not a fixed device.
How do I reposition the Heavy Duty Suction Mount?
1.) Rotate the lever upwards to unlock the suction cup. 2.) Check that both the surfaces of the suction cup and the substrate are free from dust and dirt. 3.) Re-apply the suction cup.
Tech Specs
Heavy Duty Suction Mount
- Suits smooth, non-porous, flat or slightly curved surfaces (>1m curvature radius)
- Suction cup is durable and repositionable, with easy-to-use locking and unlocking lever
- -10°C to +50°C (14°F to 122°F) ambient / outside temperature
- Supports up to 1.2kg (2.64 pounds)
- Base: Glass filled nylon housing
- Arm: made from tough, glass filled nylon
- Pivot arm designed with preload tension for easy adjustability
- Grooves in the arm for tidy cable management
- Compatible with all Quad Lock® Cases and Universal Adaptors
- Compatible with Quad Lock® Wireless Charging Head
- Compatible with all Quad Lock MAG™ Heads
- Weight: 207 grams (7.30 oz)
Dimensions