360 Suction Base

360 Suction Base

Tutorials

Quad Lock Suction Base - How To

FAQ

How do I reposition the Suction Base?

1.) Rotate the lever upwards to unlock the suction cup. 2.) Check that both the surfaces of the suction cup and the substrate are free from dust and dirt. 3.) Re-apply the suction cup.

How much weight will the Suction Base hold?

The Suction Base is capable of supporting loads of up to 1.2kg through typical use cases.

Can the Suction Base be used in planes or helicopters? Are there any required certifications?

Yes, the Suction Base can be used in aviation applications, up to an altitude of 10,000 feet. Certifications are not required as the Suction Base is not a fixed device.

What activities / applications are NOT recommended for the Suction Base?

The Suction Base is not recommended for use on motorcycles, scooters, ATVs, or other high frequency engine vibration applications.

Are replacement / spare parts available for the Suction Base?

There are no spare parts available for the Suction Base. In case of damage, please reach out to our Customer Support team for assistance.

Does the Suction Base fit inside our Dash Pad?

No, the base is wider than the base of the Windscreen/Dash Mount and will not fit inside the Dash Pad.

What surfaces will the 360 Suction Base adhere to?

The Suction Base can be attached to a number of different flat and gently curved surfaces, however, it is not intended for severely curved surfaces (ie. <1m curvature radius).

The Suction Base will adhere to smooth, non-textured, non-porous surfaces such as:

  • Glass or plastics such as PC or Acrylic (eg. windshields)
  • Smooth painted or powder coated metal or steel (eg. vehicle bodies)
  • Fibreglass with gelcoat or marine paint (eg. boat trim)
  • Gently curved surfaces (>1m curvature radius)

    Recommended applications:
  • Cars / 4x4 / 4WD
  • Boats
  • Caravans
  • Light aircraft
  • Any low-vibration element

    It is not recommended for the following substrates:
  • Organic materials such as leather, unsealed wood or fabric
  • Soft touch, rough or textured coating or paint

    Although possible, we do not recommend using the Suction Base on the following vehicles:
  • Motorcycles
  • Scooters
  • ATVs
  • Anything that causes high vibrations or receives constant exposure from outdoor elements

    Clean the surface with a damp cloth and allow it to dry before attaching.

    Ensure the mount position does not obstruct vehicle safety features such as airbags.

  • Resources

    Was this article helpful?
    0
    (0 out of 0 found this helpful)

    Comments

    (0 comments)

    Leave a comment