Lever Head
Easily attach and detach your phone with the secure dual-stage Quad Lock 360 Lever Heads. These heads can be fixed to any 360 ARM or BASE at 10-degree intervals, and the blue lever can be swapped out for red, black, or white levers (sold separately).
Tutorials
FAQ
What Screw Does this Mount Use?
Standard (Blue):
M5 x 20mm Countersunk Hex Socket, Stainless Steel 304 Natural
Pro (Black):
M5 x 20mm Countersunk Hex Socket, Stainless Steel 316 Black
Is it part of a spare screw kit?
A. Yes – Standard - https://www.quadlockcase.net/collections/accessories/products/replacement-screw-set
A. Pro - https://www.quadlockcase.net/collections/accessories/products/replacement-pro-screw-set-black
Whats Included?
- LEVER HEAD
- 1 x Quad Lock 360™ Lever Head with blue lever and silver hardware
- 1 x 3mm Hex (Allen) Key
- SHORT LEVER HEAD
- 1 x Quad Lock 360™ Short Lever Head Black with black lever and black hardware
- 1 x 3mm Hex (Allen) Key
How do I change my locking lever colour and reassemble the mount?
Just got a new Quad Lock Colored Lever and need help installing? No problem! It's very quick and easy to make the change to your existing mount, all you need is a 3mm Allen (Hex) Key.
Is the 360 Lever Head interchangeable with my existing lever on a Moto Mount?
It sure is! The 360 Lever Head uses the same design as all of our motorcycle mounts, and the Out Front Mount Pro from the bicycle mount range.
Are there mounts the Short Lever Head isn't compatible with?
Yes, the Short Lever Head is not compatible with a number of mounts, please see the list below;
Motorcycle: Brake/Clutch Mount
Cycle: Stem Mount, Out Front Mount, Out Front Mount Pro
Other: Sports/Running Armband, Belt Clip
Can I buy the Lever Head as part of a 360 kit?
The Lever Head, and Lever Head - Short, can both be purchased within the 360 kit builder or separately along with all of our 360 compatible products.
Can I rotate or reposition the lever head, e.g. to clear my rear camera or reach the lever more easily?
Yes. On 360 mounts the lever head can be fixed at 10-degree intervals, anywhere from 9 o'clock (90 degrees left) through 12 o'clock to 3 o'clock (90 degrees right). On some products, certain angles can stop the lever from working so be sure to check for any obstructions when adjusting the positioning.
Tech Specs
Lever Head
- Made from a combination of tough nylon and stainless steel
- 13.9mm high and total width of 67.6mm
- Features our patented dual-stage lock
- Weight: 18 grams (0.63 oz)
Lever Head Dimensions
All measurements are in millimetres (mm).
Lever Head - Short
- Made from a combination of tough nylon and stainless steel aluminium
- Short Lever for compact sizing
- 13.9mm high and total width of 52mm
- Features our patented dual-stage lock
- Weight: 17 grams (0.59 oz)
Lever Head - Short Dimensions
All measurements are in millimetres (mm).
