Saddle Rail Adaptor

Video Guides to help with installation and use

Shop for accessories compatible with your products

Mount the Quad Lock Bike Alarm and Finder under your saddle. It clamps to standard saddle rails and sits discreetly out of the way, with rubber grip pads to hold firm and stop rattle.

Tutorials

Saddle Rail How To Instal

FAQ

What are the limitations of this adaptor

Bike Alarm & Finder – Installation Note

If installing the Bike Alarm & Finder, ensure a 3mm gap exists between the sound outlet hole and the bottom of the seat. This will ensure the alarm sound level isn't compromised.

Diagram showing required 3mm gap between Bike Alarm & Finder sound outlet hole and bottom of seat

Saddle Rail Adaptor + Bottle Cage Adaptor – Accessory Limits

If installing a light, camera, radar, or similar accessory to the SRA + BCA combination, ensure the maximum length and mass below aren't exceeded.

Diagram showing maximum length and mass limits for accessories mounted to SRA + BCA combination

Charge Cable Clearance Tip

Some saddles may not provide enough room for the charge cable to be attached. In this case, the user can loosen the central screw to manoeuvre the assembly into a position that allows for connection. See the example below.

Example showing central screw loosened to reposition assembly for charge cable clearance

Tech Specs