Quad Lock 360 Flat Rectangle Base

 

These instructions are also available as a PDF, see below.

Screenshot_2021-10-14_at_9.44.31_am.png

Both Rectangle Bases are built with tough nylon and use the universal AMPS hole spacing standard.

Please note: Screws are not provided for mounting the base to your required surface.

The holes will accept 10G or M5 countersunk fasters. Screw holes are 5mm.

 

What's Included - 2 Hole Base

  • 1 x Flat Rectangle 2 Hole Base
  • 1 x 10mm Spacer

  • 1 x M5x30 Screw (for connecting Spacer to Lever Head or 360 Arm)

  • 1 x M5x45 Screw (for connecting Spacer to Weatherproof Wireless Charging Head)

2 Hole Base

  • Suits M5 or 10 gauge countersunk screws (not included)
  • 68.5mm (2.7") long x 28mm (1.1" wide) x 14mm (0.55") high
  • AMPS hole pitch : 48.5mm (1.9")

 

What's Included - 4 Hole Base

  • 1 x Flat Rectangle 4 Hole Base
  • 1 x 10mm Spacer

  • 1 x M5x30 Screw (for connecting Spacer to Lever Head or 360 Arm)

  • 1 x M5x45 Screw (for connecting Spacer to Weatherproof Wireless Charging Head)

4 Hole Base

  • Suits M5 or 10 gauge countersunk screws (not included)
  • 58mm (2.3") long x 50mm (2" wide) x 14mm (0.55") high
  • AMPS hole pitch : 38mm (1.5") x 30mm (1.2")

Both bases can be fixed to flat surfaces vertically, diagonally or horizontally.

If using the 4 Hole Base, we recommend using all 4 hole screws for the strongest connection.

 

Can’t find your answer in our support center? Contact us directly.