Picking a mount that suits your personal needs and fits your vehicle can feel tricky — but we're here to help. Before choosing a mount, confirm:

• Vehicle type (Motorcycle, Bicycle, Car)
• Preferred mounting position (central or side)
• Diameter measurement (handlebar, stem, mirror)
• Bolt thread and length (if replacing bolts)
• Hole pitch (for brake/reservoir mounts)
• Surface type (for adhesive)
• Charging needs
• Climate conditions
• Off-road or performance riding needs

Central Handlebar Position
If you prefer your phone near the centre of your bike:

• Handlebar Mount (Standard / Pro / Pro Large)
• Handlebar Clamp Bolt Mount
• Fork Stem Mount

Outer Handlebar / Side Position
If you prefer your phone closer to the edge of the bars:

• Brake/Clutch Mount
• Brake Reservoir Mount
• Mirror Mount
• Mirror Stem Mount

Handlebar Mounts (Standard, Pro, Pro Large)
Use case: Round handlebars

• Standard: 22mm (7/8") – 32mm (1-1/4")
• Pro: 22mm (7/8") – 35mm (1-3/8")
• Pro Large: 38mm – 51mm (1.5" – 2")

If your handlebars are larger than 51mm (2"), consider: Mirror Mount, Mirror Stem Mount, or Handlebar Clamp Bolt Mount.

Handlebar Clamp Bolt Mount
Use case: Clean, minimal central mounting

• M8 x 1.25 thread
• 35mm bolt length
• Replaces existing handlebar clamp bolt

Fork Stem Mount (Standard & Pro)
Use case: Inside fork stem tube

• No internal lip or ledge inside stem
• Internal diameter between 12.4mm (1/2") and 25.4mm (1")
• If there is a lip, or the hole is outside this size range, it is not compatible.

Brake/Clutch Mount
Use case: Mounting at lever perch

• Replaces existing clamp bolts
• Base hole pitch: 32mm – 38mm (1-1/4" – 1-1/2")

Brake Reservoir Mount
Use case: Mounting to brake fluid reservoir

• Reservoir must be square
• Screws must be centrally aligned (not diagonal)
• Hole pitch: 38mm – 70mm (1-1/2" – 2-3/4")

Mirror Mount
Use case: Clamps onto mirror stem

• Round stems 10mm – 16mm diameter

Mirror Stem Mount
Use case: Installs between mirror and bike

• M8 or M10 threaded mirror arms

1" Ball Adaptor
For customers who already have a 1" ball socket system and want to convert to Quad Lock.

Vibration Dampener

• Recommended for motorcycles
• Reduces high-frequency engine vibrations
• Compatible with all 360 Motorcycle Mounts

All Motorcycle Mounts are 360 compatible and support:

• USB Charging Head
• Weatherproof Wireless Charging Head
• Hardwired Wireless Charging Head

Typically central mounts:

• Fork Stem Mount
• Handlebar Clamp Bolt Mount
• Handlebar Mount

All are suitable. For extreme terrain: Handlebar Mount is especially robust.

• Handlebar Mount
• Mirror Mount

Both use clamp systems and are easy to transfer.

All mounts use the same secure locking mechanism. Mounting closer to the centre may reduce impact risk, but crash outcomes cannot be guaranteed.

Yes. All mounts use the same dual-stage lock. Positioning the mount on your dominant-hand side can improve ease of use.

Measure the clamping area diameter where the mount will sit. As long as it falls within the compatible size range, it will fit.

Yes, depending on available mounting points (mirror stem, reservoir, etc.).

Central Position

• Stem Cap Mount
• Out Front Mount (reversed option for standard version)
• Handlebar/Stem Mount

Outer Position

• Out Front Mount
• Handlebar/Stem Mount

Handlebar/Stem Mount

• Round bars/stems: 20mm – 40mm
• Requires 60mm mounting space
• Flat bars require Flat Bar Adaptor
• Not compatible with 360 heads (no charging head support)

Out Front Mount (Standard & Pro)

• Round bars: 22mm – 35mm
• Standard can be reversed
• Pro cannot be reversed

Stem Cap Mount

• Requires round 28.6mm stem cap

If round: Out Front or Handlebar/Stem Mount
If flat: Handlebar/Stem Mount + Flat Bar Adaptor

• Stem Cap Mount (most protected)
• Reversed Standard Out Front Mount

Handlebar/Stem Mount (tool-free O-ring installation)

Yes. While the Handlebar/Stem Mount is not 360 compatible, all other Bicycle Mounts are and will support the Cycle - Waterproof Wireless Charging Head.

Yes, but follow the torque specifications outlined in the installation guide.

All Car Mounts provide the same secure locking system. The best option depends on interior layout and climate.

Windscreen/Dash Suction Mount

• Smaller suction base
• Adjustable gimbal head

Heavy Duty Suction Mount

• Larger suction base
• Dual pivot arm
• Greater adjustability

• Hook extends 10mm – 32mm
• Requires 3-level vent fins
• Minimum 8mm blade gap

• Uses 3M™ VHB 5611
• For smooth, non-porous surfaces
• Ideal install temp: 21°C – 38°C
• Not recommended below 10°C
• More permanent solution

• Fits 70mm – 100mm diameter holders
• Works in round or square holders
• Includes 175mm flexible gooseneck

Converts 1" or 20mm socket arms to Quad Lock. Compatible with all wireless charging heads

All Car Mounts are 360 compatible and support:

• Wireless Charging Head
• MAG Wireless Charging Head
• Weatherproof Wireless Charging Head

• Vent Mount
• Cup Holder Mount

(Adhesive mounts can also perform well if properly installed.)

• Adhesive Dash/Console Mount (most stable)
• Heavy Duty Suction Mount (strong but removable)

Avoid Adhesive Dash/Console Mount if you want a transferable option.

Not typically. It is designed for protection against motorcycle engine vibration.

When properly removed, it should not damage glass. Clean surface before installation.

It is designed as a permanent installation. Removal will require heat to soften the glue and a new 3M sticker is required.