Motorbike Wireless Charging Head - FAQ

Q. What Mounts does it fit? 

A. It fits all our motorbike mounts and mounts which feature our index connecting feature such as the Out Front Mount Pro. 

MWC_MountingOptions_1024x768_1907-139_710x.jpg

 

Q. What is the output of the SAE to USB Powerbox? 

A: QC2.0 output with a Maximum of 18w

Screen_Shot_2020-06-02_at_3.53.19_pm.png

 

Q. Can I mount the Wireless Charger on top of the Moto USB? 

A. Yes you can but it will require a M5 x 50mm CS screw (Not included)

 

Q. What's the difference between this and the standard Wireless Charging Head?

A. There are several differences between this charger and our Car/Desk Mount wireless head. As this charger is designed for outdoor use on motorcycles it needs to withstand vibration, impacts, UV, and be resistant to chemicals (petrol, oil etc) which requires more durable materials and a very robust design.      

 Our Motorcycle Wireless Charger includes the following components in the box:

  • Wireless Charging Head
  • A 12-24V - 5V/9V Power converter box
  • 2 x USB-C cables (50cm and 150cm)  
  • 1 x SAE Cables
  • 5 x zipties
  • 3mm hex key

And provides following features: 

  • Patented Dual Stage lock for secure mounting
  • Anodized Aluminium rear housing to keep it cool while charging. 
  • IP66 water resistance enclosure so you can ride in the rain and wash your bike
  • Surge & Polarity protection to keep the charger protected
  • Thermal protection to prevent overheating.   

 

Q. Will it drain my battery if I leave my bike parked?

The Moto Wireless Charger may draw a small amount of power from your battery when not in use depending on how you have wired it up. 

 MWC_ConnectOptions_1024x768_1907-139_1_710x.jpg

If you wire the charger via a factory USB port or wire it into switched supply (light circuit or accessories) it will switch off when the circuit is switched off and will not draw power.

If you wire it via a SAE connector/directly to your battery, the device will draw a very slight current when not in use. 

If the power button on the wireless head is switched on, it will draw 12mA. If the power button on the wireless head is switched off, it will draw 6mA 

An average motorcycle battery this will take about 1 month to drain at 12mA or 2 months at 6mA. We recommend disconnecting the charger from the battery if you bike is parked and not started for prolonged periods. 

If your phone is left attached to the charging head it will continue to draw current and charge, even if your bike’s ignition is turned off if wired directly to the battery. 

Can’t find your answer in our support center? Contact us directly.